Services > Casing and Tubing Running Services > Casing Running Services > Power Tong
Drawing on years of casing and tubing running experience, Baker Hughes thoroughly analyzes your needs before selecting the most suitable power tong.
Our comprehensivesuite of state-of-the-art hydraulic tongs is manufactured by industry leaders recognized by the industry for delivering advanced and reliable tools such as FARR, MacCoy, TIOT and Clincher
These tongs provide the highest levels of safety and efficiency.
Casing and tubing tongs have door safety locks and are available with optional integral backup systems to ensure optimum connection makeup. They are maintained
and serviced to ISO 9001:2008 standards.
TOS power tong benefits include a full power tong range , reduced operating hazards, tongs to meet specific requirements, and enhanced reliability to reduce downtime.
Sizes range from 31/2 in. (rated 0-4,500 ft/lb or 6,101 N-m) to 31 in. (rated 0 to 85,000 ft/lb or 116,058 N-m).
Special tongs are also available. For example, the 14, 75/8, 51/2, and 41/2 in. power tongs are offered with the complete ChromeMaster™ nonmarking jaw system for CRA tubulars.
Unique tongs are available for screen liner and drillpipe makeup and breakout.
The FARR HD26000 casing tong can handle tubulars as small as 10-3/4" and as large as 26" in diameter. Other sizes can be special-ordered. Tong can be mounted on either a CLINCHER® or a FARR® hydraulic backup. Available with McCoy's patented WinCatt® data acquisition and torque control system for the make-up of tubular connections.
Maximum Hydraulic Requirements: 3000 PSI (20.68 MPa) 60 GPM / 227.1 LPM Length: 85-1/2 inches / 217.2 cm. Maximum Width: 54-3/4 inches / 139.1 cm. Height (Excluding Chain Sling): 36 inches / 91.44 cm. Space Required On Pipe: 8 inches / 20.32 cm. Torque arm length: 55 inches / 139.7 cm. (Pipe Centre Line to Load Cell Centre) Weight (Approximate): 4200 lb. / 1909 kg. Recommended Spring Hanger: Capacity 4500 lb. (2045 kg.) McCoy P/N 85-0106XXXH
The FARR KT13625 casing tong can handle tubulars as small as 3-1/2" and as large as 13-5/8" in diameter. Wraparound jaw and die technology for the two tong jaws is available.
Tong can be mounted on either a CLINCHER® or a FARR hydraulic backup. Available with McCoy's patented WinCatt® data acquisition and torque control system for the make-up of tubular connections.